HPI MICRO RS4 DRIFT FAIL CREW NISSAN SKYLINE R34 GT-R 1/18th SCALE 4WD MICRO CAR
Micro GT-R Drift Action with The Fail Crew!
The Micro Fail Crew Nissan Skyline GT-R is perfect for shredding tires inside and outside, with a high-powered motor driving all four wheels and coil-over shocks providing smooth power and excellent control. This Ready To Run Micro RS4 Drift kit features a highly detailed and scale Nissan Skyline R34 GT-R replica body for an awesome scale look wherever you drive! It's fitted with hard plastic tires out of the box, so it's ready for wild drift action on any surface! The HPI Micro RS4 is powered by an HPI 180-size motor, electronic speed control, full time 4WD belt drive and water-resistant steering servo. It's ready to drift straight out of the box, just like Max's full-size Nissan Skyline GT-R!
EASY TO DRIVE!: The Micro RS4 is super-easy to drive and get familiar with – all you have to do is install the batteries, plug it in and switch on the radio and car. It’s that easy! To drive the car, simply pick up the controller with your left hand, put your left index finger into the trigger area, and then put your right hand on the steering wheel – it’s as natural as driving a real car! Turn the wheel to go left and right, and gently pull on the trigger with your left index finger to go forwards. To stop the car, gently push away from you with your left index finger - push it again to go into reverse. It takes only seconds to get used to this easy operation, and in no time at all you’ll be ripping off jaw-dropping moves, just like Max in full-size competitions!
REPLICA WHEELS and TIRES: This car features true-to-scale replica wheels, taken directly off Max's one-of-a-kind Nissan Skyline GT-R! These are exact replicas of the wheels used on the full-size car, even down to the awesome two-tone olive and silver! With the hard plastic compound, the tires are super-easy to slide and drift on any surface, indoors and out! All you have to do is stomp on the gas and yank the wheel and you're sideways!
4WD System for Great Handling: The Micro RS4 Drift features a smooth 4WD system to give you the best handling anywhere you drive. The belt drive runs down the length of the chassis from the direct-drive rear axle to the front differential for an efficient and elegant drive system that gives you the perfect amount of grip at the front and rear!
Cantilever Front Shocks: Unique F1-style front shock absorbers provide a smooth steering response for great control. Independent front suspension is the ideal solution for a car this size, allowing your steering inputs to directly affect the direction and control of the car. You'll feel as if you're actually in the car, steering it around corners!
Easy Driving Anywhere: With its 4WD belt-drive system and hard tires, the Micro RS4 Drift is easy to drift on any smooth surface! Concrete, short carpet and even tarmac or asphalt are all ideal sliding surfaces that were made for your car - you'll feel like a real drifter with the Micro RS4!
Stop At Nothing - Hop Up Your MICRO!: Tuning the car is simple with HPI option parts - not only can you change the body style and wheels for a whole new look, you can also change the tires and width of the car for different traction characteristics. Upgrade the efficiency of your Micro with these tough one-piece Universal Dogbones!
Features:
- Pre-Built, Ready to Run 1/18th scale racing car
- Officially licensed replica of Max Tvardovsky's Nissan Skyline GT-R
- Drives just like a larger RC car!
- 4WD for maximum control and speed
- Belt drivetrain for efficient power transfer to front wheels
- Double-wishbone independent front suspension
- Coil-over inboard cantilever front shocks
- Front universal dogbones
- Front and rear differentials for maximum drivetrain efficiency
- Fully equipped with ball bearings for maximum efficiency
- SCM-2S-WP electronic speed control for total control
- 2.4GHz radio system for long range reception, no frequency crystals needed
- 180-size motor for fast speeds and quick acceleration
- 6v 1200mAh battery for long driving times and plenty of power
- AC wall charger included for extra convenience
- 4 AA batteries included for transmitter
Specification
Model information
SPECIFICATIONS:
Length: ~220mm
Width: ~105mm
Height: ~80mm
Wheelbase: 150mm
Tire Diameter: 36mm
Drivetrain: Full-Time Belt 4WD
WHAT YOU NEED:
Absolutely nothing! All batteries and charger included to get driving right away
We're proud of every product we create. Here are some reviews of this product.