HPI Savage X 4.6 GT-6 1/8th 4WD Nitro Monster Truck
THE BEAST IS BACK
The Savage started the RC Bashing movement and 2 decades later, we're still here, stronger than ever and thrilled to blast back into the ring with the holy grail, the jewel in the crown... Ladies and gentlemen, the Savage is back! With a raft of NEW features including 17mm Aluminum Hex Hubs, all hex hardware, new bumpers, new body, wheels & tires, new Super HD Drivetrain (From the Savage FLUX), new Captured Hinge Pins, HD Servo Saver spring, 0.9mm Clutch Springs for boosted torque & acceleration and a new RF-50N Nitro Receiver.
ALL-NEW WHEELS & TIRES: A new Savage deserves a new set of brutally agressive HPI Havok 3.8" wheels, wrapped in yet another addition to the TREDZ "by HPI Racing" Tire rack. The Tredz Terrahex 3.8" Tires are designed tough, but for ultimate agility and handling at ground shaking speeds.
ULTIMATE SAVAGE TOUGHNESS: From the new Super HD Drivetrain, to the Bulletproof 29/9T Differentials, to the new Rugged Bumpers, every inch of the Savage X 4.6 GT-6 is built to survive and dominate. With beefy suspension arms, ready to take the punishment of big-air drops while everything within is protected by the reinforced thick aluminum TVP (Twin Vertical Plate) chassis, emblazoned with the notorious 'X' emblem.
Not for the faint of heart!: Like all HPI trucks, the Savage X 4.6 GT-6 is easy to drive with the included steering wheel controller - but it should be handled with extreme caution! Hit the gas and the Big Block 4.6 engine roars into life and to the uninitiated things can get pretty crazy VERY quickly! Expect to get mud, rocks and dirt slung at you when you pull the trigger! Once you get used to the power, you'll be able to rip off huge smokey stunts and initiate 2nd gear on speed runs safe in the knowledge that the new RF-50N Nitro Receiver features a Low Voltage Failsafe to keep your pride and joy safe in the event of a power cut.
Features:
- NEW! Standardized 17mm Aluminum Hex Hubs
- NEW! Tredz Terrahex 3.8" Tires
- NEW! 3.8" Havok Wheels
- NEW! Pre-Cut Factory Finished And Decaled GT-6 Bodyshell
- NEW! Plastic molded body detail parts
- NEW! Rugged Modern Styled Bumpers
- NEW! Captured Hinge Pins
- NEW! All hex hardware
- NEW! Super HD Drivetrain - Standarized with Flux
- NEW! Shim behind Spur Gear to reduce wobble & wear
- NEW! 0.9mm Clutch Springs - Later engagement for more torque, acceleration & reduced clutch wear
- NEW! RF-50N Nitro Receiver (with Low Voltage Failsafe)
- 4WD Shaft Driven Monster Truck
- Independent Double Wishbone Suspension
- Oil Filled Adjustable Coilover Shocks
- Bulletproof 29/9T Differentials
- Nitro Star F4.6 V2 Engine With Pullstart
- 2 Speed Transmission
Specification
Model information
Specifications:
Length: 534mm
Width: 445mm
Height: 255mm
Wheelbase: 336.5mm
What you need:
4 AA batteries for transmitter
5-Cell NiMH Hump Receiver Battery
Glow Igniter & Fuel Bottle
20-25% Nitro Fuel
Battery charger for receiver battery
We're proud of every product we create. Here are some reviews of this product.