HPI VORZA S TRUGGY FLUX 1/8th Scale 4WD Electric Truggy with FLUX Brushless System

The new VORZA line-up is on the launchpad!! Taking its performance heritage seriously
Under the body, each new Vorza truggy has a ton of great durability and tuning features that make each one a joy to drive with a clear upgrade path to the ”S” spec and beyond!  The Vorza takes the race-winning design and mixes it up with HPI FLUX tech to give you awe-inspiring speed! This is a ready to run (RTR) truggy that you can take to BMX jumps for hair-raising big-air thrills, and then you can take it straight to any track for top-level racing action - it will turn heads and amaze your friends! The RTR Vorza S FLUX chassis features a wide range of excellent features, esteemed performance heritage, amazingly powerful motor and speed controller combination, complete adjustability in the suspension and a tunable drivetrain, if you want to experiment to tune your Vorza S FLUX to your liking. The S Spec adds 7075 aluminum chassis plate, 7075 front and rear shock towers, 7075 front and rear suspension hangers at both ends and 16mm big bore shocks with threaded body, top cap, lower seal cap and spring adjuster all  in high quality aluminum! They also include a HD version of the 4mm shock shaft!

The FLUX ELH-6S can handle twin 3S LiPo batteries (that's a total of 6S LiPo power!) so it can deal with anything the MLH-2200 motor can dish out! 6.5mm bullet connectors secure the motor wires for loss-free connection to the 12-gauge wires. A large fan sits on top of the heatsink inside a protective cover to keep things cool when the weather's warm.

Technical Specifications:
Input Voltage: 3-6S LiPo
Continuous Current: 150A
Burst Current: 950A
Resistance (Ω): 0.0035
Motor Limit: 4S LiPo <3000KV, 6S <2400KV
BEC: 6V/3A Switching BEC
Connector: 6.5mm Bullet
Dimensions: 59.5x48x42mm
Weight: 178g

ALL-NEW WHEELS & TIRES
A new Vorza deserves a new set of boots and rims! Brand new 4.0" 8-Spoke High-Impact nylon Truggy wheels for 17mm wheel adaptors, wrapped in yet another addition to the TREDZ "by HPI Racing" Tire rack. The Tredz Voodoo 4.0" Tires are designed onto a performance canvas, using HPI's tried and tested S Compound. The rotational Voodoo tread pattern works great on a variety of surfaces, from hard-pack dirt to grass and astroturf.

ALL-NEW RADIO GEAR
Like all HPI trucks, the Vorza Truggy is easy to drive with the included steering wheel controller. 
The All-New 2.4Ghz FHSS TF-50 Transmitter features:

Drop down steering position for a natural control position
Foam covered wheel for extra comfort and grip
Swappable steering wheel design for left handers!
Rubber finger and thumb handle grips
Rubber bumpers on all corners for the highest protection.
Magnetic area on the base for body clips or screws while you work!
Digital on and off switch
Audible warnings if you leave the TF-50 switched on as well as battery life!
Servo Reverse, EPA, Trims and Dual Rate switches.
The NEW RF-50 receiver features a waterproof silicone inner jacket for use in any weather and a built-in failsafe. Signal on the RF-50 for the FLUX cars and signal and battery life for the RF-50N on the Nitro!

Features:
Factory-assembled & pre-painted 4WD 1/8 scale Car
Pre-painted body with awesome speed graphics
Pre-mounted all-terrain tires
High torque IP67 rated waterproof servo
6S LiPo Capable
MLH-2200 2200KV brushless motor with 5mm shaft
Waterproof 150A ELH-6S speed controller
LiPo ready adjustable battery tray with secure hook-and-loop straps
Aluminum heatsink motor mount help the motor stay cool with optional fan mounting points
Full-time 4WD for excellent control
Efficient and tough shaft drivetrain with front universals
Aluminum 16mm Big Bore oil-filled shocks for confident control
7075 Aluminum shock towers front and rear
7075 suspension blocks front and rear
Thick steel turnbuckles
Front and rear sway bars for excellent handling
Hardened steel spur and pinion gear for extreme durability
Spiral-cut bevel gears for the best balance of strength and efficiency
Tough oil-filled 4-gear differentials
Suspension based on World Championship pedigree
Super low CoG for superior handling
Total adjustability: roll centre, wheelbase, camber, sway bar and more
Nylon stone and dirt guards keep rocks out of the chassis
Dual bellcrank steering
Cam type servo saver
All hex head hardware
Full set of rubber-sealed ball bearings
2.4GHz Radio Set with waterproof receiver
Enclosed receiver box